Introduction For Buttons On Remote Controller - Toyotomi RUBI Series User Manual

Table of Contents

Advertisement

PORTABLE AIR CONDITIONER

Introduction for buttons on remote controller

4
Swing button
Press this button to turn "ON" & "OFF" swing.
5
Fan button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
,
, to
then back to Auto.
NOTE: There are 3 speeds for the Fan Speed of this model.
6
Sleep button
Press this button to go into the Sleep operation mode. Press it again to cancel this
function. This function is available in COOL, HEAT.
If the device is operating under Cooling mode, when you choose Sleep mode,
the preset temperature will increase by 1ºC (2ºF) within 1 hour and the preset
temperature will increase by 2ºC (4ºF) within 2 hours. The unit will then operate
at this temperature. Sleep Mode is not available for Fan and Dry Mode. If Sleep mode
operates, it will be displayed on the screen. The other functions will not be visible.
7
Timer button
Under ON status, press this button to set timer OFF; Under OFF status, press
this button to set timer ON.
Press this button once and the characters of HOUR ON (OFF) will flash to be
displayed. Meanwhile, press "+" button or "-" button to adjust timer setting (time
will change quickly if holding "+" or "-" button). Time setting range is 0.5~24hours.
Press this button again to confirm timer setting and the characters of HOUR ON
(OFF)will stop flashing.
If the characters are flashing but you haven't press timer button,timer setting status
will be quit after 5s.If timer is confirmer, press this button again to cancel timer.
8
H
e
l a
h t
b
t u
o t
n
Press this button to turn on or turn off the health and scavenging functions in
LCD displays "
". Press the button for the second time to start health and
scavenging functions simultaneously; LCD displays "
button for the third time to quit health and scavenging functions simultaneously.
Press the button for the fourth time to start health function; LCD display "
Press this button again to repeat the operation above.
This function is applicable to partial of models.
Auto
Speed 1
Speed 2
(This function is not applicable for this model. )
Speed 3
" and "
68
". Press this
".
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rubi tpac-12ch

Table of Contents