Toyotomi UTN-18AP User Manual page 85

FUNCTION INTRODUCTION FOR COMBINANTION BUTTONS
ENERGY-SAVING FUNCTION
Under cooling mode, press "TEMP" and "CLOCK" buttons simultaneously to
start up or turn off energy-saving function. When energy-saving function is
started up, "SE" will be shown on remote controller and air conditioner will
adjust the set temperature automatically according to ex-factory setting to
reach to the best energy-saving effect. Press "TEMP" and "CLOCK" buttons
simultaneously again to exit energy-saving function.
Note:
• Under energy-saving function, fan speed is defaulted at auto speed and it
cannot be adjusted.
• Under energy-saving function, set temperature cannot be adjusted. Press
"TURBO" button and remote controller will not send signal.
• Sleep function and energy-saving function cannot operate at the same
time. If energy-saving function has been set under cooling mode, press
sleep button to cancel energy-saving function. If sleep function has been
set under cooling mode, start up the energy-saving function to cancel sleep
function.
8 ºC HEATING FUNCTION
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to
start up or turn off 8 ºC heating function. When this function is started up,
"8 ºC" will be shown on remote controller. The air conditioner keeps the heating
status at 8 ºC. Press again "TEMP" and "CLOCK" buttons simultaneously, to
cancel this function.
Note:
• Under 8 ºC heating function, fan speed is defaulted at auto speed and it
cannot be adjusted.
• Under 8 ºC heating function, set temperature cannot be adjusted. Press
"TURBO" button and the remote controller will not send signal.
• Sleep function and 8 ºC heating function cannot operate at the same time.
If 8 ºC heating function has been set under heating mode, press sleep
button to cancel 8 ºC heating function. If sleep function has been set under
heating mode, start up the 8 ºC heating function to cancel sleep function.
• Under ºF temperature display, the remote controller will display 46°F
heating.
85
and
GB