Introduction For Buttons On Remote Controller; Light Icon; Sleep Icon; Temp Icon - Toyotomi HTN/HTG-09IV User Manual

Introduction for buttons on remote controller

MODE icon
15
If MODE button is pressed,
current operation mode icon
AUTO, COOL,
DRY, FAN or
only for heat pumpmodels) will show.
LOCK icon
16
is displayed by pressing "+"
and "-" buttons simultaneously. Press
them again to clear the display.

LIGHT icon

17
is displayed by pressing the
LIGHT button. Press LIGHT button
again to clear the display.

SLEEP icon

18
is displayed by pressing
the SLEEP button. Press this
button again to clear the display.
19

TEMP icon:

Pressing TEMP button,
(set temperature),
(indoor ambient temperature)
(outdoor ambient temperature)
and blank is displayed circularly.
This is not available in this model.
BLOW
Up & down swing icon
20
the up & down swing down button.
Press this button again to clear the
HEAT
display.
Left & right swing icon
21
left & right swing button.Press this
button again to clear the display.
SET TIME display
22
After pressing TIMER button,ON or
OFF will blink.This area will show
the set time.
DIGITAL display
23
This area will show the set temperature.
In SAVE mode, " SE" will be displayed.
FAN SPEED display
24
Press FAN button to select the
desired fan speed setting(AUTOLow-
Med-High).Your selection will
be displayed in the LCD windows,
except the AUTO fan speed.
10
is displayed when pressing
is displayed when pressing the
GB