Toyotomi UTN-18AP User Manual page 96

Note:
§
Please contact the local agent for installation.
§
DO NOT use unqualifi ed power cord.
Selection of installation location
Basic requirement
Installing the unit in the following places may cause malfunction. If it is
unavoidable, please consult the local dealer.
1. The place with strong heat sources, vapors, fl ammable or explosive gas, or
volatile objects spread in the air.
2. The place with high-frequency devices (such as welding machine, medical
equipment).
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7. The appliance shall not be installed in the laundry.
8. It is not allowed to be installed on the unstable or motive based structure
(such as a truck) or in the corrosive environment (such as chemical factory).
Indoor unit
1. There should be no obstruction near air inlet and air outlet.
2. Select a location where the condensation water can be dispersed easily
and will not affect other people.
3. Select a location which is convenient to connect the outdoor unit and near
the power socket.
4. Select a location which is out of reach for children.
5. The location should be able to with stand the weight of indoor unit and will
not increase noise and vibration.
6. The appliance must be installed 2.5 m.
7. DO NOT install the indoor unit right above the electric appliance.
8. Please try your best to keep way from fl uorescent lamp.
96
GB