Toyotomi UTN-18AP User Manual page 81

-If the air conditioner temperature is set between 16-23 ° C, the temperature
will increase by one degree per hour for the next 3 hours after the power
is turned on and then remains stable. At the 8th hour after the operation is
switched on, the temperature will be reduced by one degree automatically
- If the air conditioner temperature is set between 24-27 ° C, the temperature
will increase by one degree per hour for the next 2 hours from the start of
the operation and then remain stable. At the 8th hour after the operation is
switched on, the temperature will be reduced by one degree automatically.
-If the air conditioner temperature is set between 28-29 ° C, the temperature will
increase to a certain degree within the next hour of activation and then remain
stable. At the 8th hour after the operation is switched on, the temperature will
be reduced by one degree automatically.
-If the air conditioner temperature is set from 30 ° C to above, it will remain
constant for 7 hours after the operation is switched on and at 8 o'clock the
temperature will be reduced by one degree automatically.
During Heating mode:
-If the air conditioner selection is 16 ° C, the air conditioner will continue to
operate at this temperature.
-If the air conditioner temperature is between 17 ° C and 20 ° C, the air
conditioner's temperature will drop to a certain extent after the fi rst hour of the
operation and then remain constant.
-If the air conditioner's temperature is between 21-27 ° C, the air conditioner's
temperature will drop by one degree per hour within the fi rst 2 hours of
activation and then remain constant.
-If the air conditioner's temperature is between 28-30 ° C, the air conditioner's
temperature will be reduced by one degree per hour in the fi rst 3 hours after
activation and then will remain constant.
Sleep Mode 3
Sleep Mode 3 " " is available in Cooling or Heating modes. By activating this
function, you can create your own personalized program based on time and
temperature. To set the time and temperature, press the "TURBO" button for
3 seconds, and the temperature icon will fl ash on the remote-control screen.
GB
81