Lexmark 4021 User Manual page 107

Understanding the printer menus
Use
Factory Defaults
Do Not Restore
Restore Now
Export Configuration Package
Export
Flash Drive
Print Settings menu
Use
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Sides (Duplex)
1 sided
2 sided
Staple
Off
On
Hole Punch
Off
On
To
Restore the printer settings to the factory default settings.
Notes:
•
Do Not Restore is the factory default setting. This keeps
the user‑defined settings.
•
Restore Now returns all printer settings to the factory
default settings except Network/Ports menu settings. All
downloads stored in RAM are deleted. Downloads
stored in flash memory or on a printer hard disk are not
affected.
Export the printer configuration file to a flash drive.
To
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
Specify whether prints are on one side or on both sides of the page.
Note: 1 sided is the factory default setting.
Specify whether prints are stapled.
Notes:
•
Off is the factory default setting.
•
On allows the printer to staple print jobs.
•
This menu appears only when a supported staple finisher is installed.
Specify whether prints have holes for binding.
Notes:
•
Off is the factory default setting.
•
This menu appears only when a supported staple, hole punch finisher is
installed.
107