Part Names And Functions; Front - Epson TM m30II-SL Technical Reference Manual

Part Names and Functions

Front

1
2
3
1 Upper tablet holder
2 Tablet table (standard)
3 Lower tablet holder
4 Security slot
5 Lock lever
6 Screw
7 Cover open lever
8 Feed button
9 Power switch
10 Roll paper cover
11 Panel LED
11
Holds the upper side of a tablet.
Place a tablet on this table.
Holds the lower side of a tablet.
Use here to attach an anti-theft tool such as a wire. This slot is provided on both sides
of the printer.
Operate this lever to secure a tablet.
The screws are securing the tablet table.
Operate this lever to open the roll paper cover.
Press this button once to feed the roll paper for one line. Hold down this button to
continue feeding the roll paper.
This switch turns the printer on or off.
Open this cover when installing or replacing the roll paper.
For explanation of the LEDs, see
When turning off the printer without using the power switch, it is recommended to send a power-
off command to the printer. If you use the power-off sequence, the latest maintenance counter val-
ues are saved. (Maintenance counter values are usually saved every two minutes.)
For information about ESC/POS commands, see the ESC/POS Command Reference.
Chapter 1 Product Overview
10
9
8
7
6
5
4
"Panel LED" on page 17
15