Part Names and Functions
Manual cutter
Cutter cover
Roll paper cover
Open this cover to install/replace the roll paper.
Manual cutter
Use this cutter when you cut the roll paper manually.
Cutter cover
Open this cover to unlock the autocutter blade when the roll paper cover does not
open due to a paper jam. (U "Paper is jammed" on page 16)
Power switch
Use this switch to turn on or off the printer.
Cover open lever
Use this lever to open the roll paper cover.
Control Panel
(Power) LED: This LED is on when the printer is on.
Error LED:
Paper LED:
Feed button:
Roll paper cover
Power switch
This LED indicates an error. (U "Error LED is on" on
page 16 or "Error LED is flashing" on page 16)
This LED is on when the paper is near end or out.
This button feeds paper.
Control panel
Cover open lever
5