Table of Contents
Advertisement
Item\Method
Font B auto replacement
Font C auto replacement
Multi-tone print density
Optional buzzer
Batch rotate print (Upside Down)
Communication condition of USB interface
Communication condition of
communication interval during power
saving mode
*1 Available only with TM Utility for iOS.
• For information about how to use the software setting mode, see
page
• All the settings are available using the ESC/POS commands.
Functions
Receive buffer capacity
• 4KB (initial setting)
• 45 bytes
• The receive buffer capacity for the
• The receive buffer capacity of the USB-A Device Charging connector is 8 K bytes.
BUSY condition
• Receive buffer full/Offline (initial setting)
• Receive buffer full
In either case above, the printer enters the BUSY state after power is turned on, and when a self-test
is being run.
Auto line feed
• Normally disabled (initial setting)
• Normally enabled
interface
98.
TM Utility for iOS,
TM-m30II Utility
for Android
for Windows
"Software Setting Mode" on
interface is 64 K bytes.
Chapter 5 Advanced Usage
Software
Setting Mode
82
Advertisement
Table of Contents
