Resetting The Interface Settings; Resetting Using The Interface Setup Mode; Resetting Using The Status Sheet Button - Epson TM m30II-SL Technical Reference Manual

Resetting the Interface Settings

Follow the steps below to restore the network settings to the factory default.

Resetting using the Interface Setup Mode

For information about the Interface Setup mode, see the link below.
"Interface Setup Mode" on page 101

Resetting using the Status Sheet Button

If you have removed the bottom cover of the printer, you can use the status sheet button.
1
Turn off the printer and close the roll paper cover.
2
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
Chapter 5 Advanced Usage
107