Table of Contents
Advertisement
Mountable Tablet Types
The tablets that can be connected to the printer and the available USB connectors are as shown below. To know
the location of the USB connectors, see
"Z" means that the device can be connected.
"P" means that availability varies by device to device.
"--" means that it is not supported.
Type
Product name
Apple
iPad (5th generation)
*1*6
device
iPad (6th generation)
iPad (7th generation)
iPad Air 2
iPad Pro (3rd generation)
iPad Pro (4th generation)
iPad mini 4
*6
Windows tablet
*6
Android device
*1
A device equipped with a Lightning connector can be used.
Use a genuine Apple or MFi Certified Lightning to USB Cable. If you use a non-certified (non MFi) Lightning Cable,
or use an extension cable, data communication and charging may not be performed normally.
*2
When a tablet computer is connected to the USB-A - Device Charging connector, the Bluetooth function of the
printer is disabled. To charge the device keeping it connected via Bluetooth, change the Interface selection setting
to "Bluetooth only". For more details, see
However, if you do so, the maximum supply current is limited to 0.5 A, which may not be enough for charging some
types of tablet. Please use the tablet after testing and evaluating it adequately.
*3
Depending on the settings or usage conditions of the device, it may not be fully charged. To fully charge the device,
darken its screen or take such other measures to reduce power consumption.
*4
When connecting an Android device for data communication, make sure that the device satisfies the following
requirements.
Requirements: The version of Android OS is 10 or later with kernel version 4.9.15 or later
However, Epson does not guarantee normal operation of all Android devices even if they satisfy the requirements.
Run some tests before actually using the device.
*5
The device must be compatible with an OTG cable and must be capable of acting as a USB host.
*6
For more detailed information about tablets that can be used with the printer, see the link below.
www.epson-biz.com/?content=sht_tmm30ii-sl_tablet
If your tablet is not allowed to connect to the USB connector of the printer, pull out its cable
through the cutout of the printer just like the AC cable.
"Connectors" on page
18.
USB connector
USB-A - Device Charging
(up to 2.1 A)
Data
Charging
communication
*2
Z
P
--
--
*2
Z
P
--
--
*4
*2
P
P
"Software Settings" on page
Chapter 2 Setup of the Tablet
USB-A
Type-B
(up to 0.5 A)
Data
Charging
communication
--
--
--
--
*3
--
Z
--
Z
*5
--
P
81.
Tablet table
Standard
Large
Standard
Standard/
Large
Standard/
Large
33
Advertisement
Table of Contents
