Table of Contents
Advertisement
6
Attach the wall-mount to a wall.
7
Slide the bracket into the slots of the wall-mount.
• To fix the printer securely, install the wall-mount on a wall made of wood, concrete, or
metal. The thickness of the wall should be 10 mm or more.
• To ensure adequate strength for supporting the printer with the wall-mount, use screws
that are appropriate to the type of the wall and have enough thread length. A screw
with 4 mm diameter and length of 12 mm or more is recommended.
• Make sure to secure the wall-mount to the wall using the all six screw holes in the wall-
mount.
• Ensure sufficient space around the printer before attaching the wall-mount.
• Check that there is enough space for opening the roll paper cover.
84 mm
(3.31 inches)
Before mounting the printer, make sure that the wall-mount is securely attached to the
wall.
Chapter 4 Using Dedicated Optional Products
26 mm
(1.02 inches)
26 mm
(1.02 inches)
80
Advertisement
Table of Contents
