Table of Contents
Advertisement
5
Select the printer to be paired, and then click [Connect].
6
If the window to enter a passkey appears, enter a passkey and click [OK].
7
Select the port to be used from the pull-down list, and then click [OK].
8
The "Connection complete" window appears. Click [Test Buzzer] or [Test Printing] to
check operation.
9
Click [Back to Main screen] to return to the main window.
10
Click the "x" button of TM Bluetooth
• If "Error" is displayed when you click the [Search] on the TM
whether:
* The
*
• If the device is not displayed on the TM
Status shows "
Check whether:
* The printer is not turned on.
Turn on the printer.
* The printer is 10 m or further away from the computer.
* Confirm that there is no other wireless device, such as a microwave oven and cordless
telephone, that can interfere with the
* If the printer and the computer are placed in different rooms separated by a wall, move the
printer and/or the computer in the same room.
* The printer may not be detected when the search time is short. Try search again with longer
search time.
* While a computer and printer are communicating, the printer cannot be detected by other
computers. Confirm that the printer to be detected is not communicating with any
computer.
®
Connector to exit.
adapter is installed to the computer.
is ON in the Windows settings.
" after pairing.
Chapter 3 Setup of the Printer
Connector, check
Connector or the TM
printer.
Connector
69
Advertisement
Table of Contents
