Table of Contents
Advertisement
Connecting the AC Cable
Follow the procedure below to connect the AC cable.
Connect the AC cable to the AC adapter.
1
Route the AC cable.
2
The AC cable can be pulled out from the left, right, rear, or bottom of the printer.
"Routing the Cables" on page 35
Route the cable according to the direction that you pull out it.
O When pulling out from the left side of the printer
O When pulling out from the rear or bottom of the printer
When pulling out the cable from the bottom, put the AC plug through the cutout of the
bottom cover in advance.
Chapter 2 Setup of the Tablet
42
Advertisement
Table of Contents
