Table of Contents
Advertisement
Placing the Printer
The printer can be placed either horizontally or vertically.
Placing the Printer Horizontally
Install the printer on a level and flat surface.
The roll paper is ejected from the top side, and the roll paper cover opens upward.
How to Secure the Printer
If you want to secure the printer to the installation site such as a table, use the optional tape (model number:
DF-10).
Follow the procedure below to secure the printer with the tape.
1
Turn off the printer.
2
Disconnect the AC cable from the power outlet.
3
Turn over the printer.
4
Remove the backing sheet from the tape.
• Do not place the printer in locations subject to high dust levels.
• Do not give a high impact on the printer during operation. Doing so may cause the print failure.
• Be careful not to place cords or foreign substances under the printer.
• When using a cash drawer, secure the printer to prevent it from moving due to vibrations.
Chapter 3 Setup of the Printer
49
Advertisement
Table of Contents
