Table of Contents
Advertisement
OT-WH30SL (Wall Hanging Bracket Set)
OT-WH30SL is a dedicated bracket set for hanging this TM-m30II-SL printer on a wall.
Contents of the OT-WH30SL package
1. Wall-mount
2. Bracket
3. Four 3 x 8 screws for attaching the bracket to the printer
Using OT-WH30SL
This section describes how to install and use OT-WH30SL.
Make sure to read the cautions and notes to prevent the printer from falling from the wall.
1
Turn off the printer.
2
Disconnect the AC cable from the power outlet.
• The package does not include screws for attaching the wall-mount to a wall. Use screws
appropriate to the type of the wall.
• Depending on the conditions during storage and shipping, some rust may form around the
edges of the wall-mount or bracket. If you find such rust, remove it with sandpaper.
Chapter 4 Using Dedicated Optional Products
78
Advertisement
Table of Contents
