Resetting the Interface Settings
Follow the steps below to reset the interface settings.
1
Turn off the printer and close the roll paper cover.
2
If the connector cover is attached, remove the cover.
See
"Attaching the Connector Cover" on page 46
3
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
Hold down the status sheet button until the initialization execution message is printed.
You can return the interface settings to their defaults from the Interface Setup mode. See
"Interface Setup Mode" on page 76
Only network settings are returned to their defaults.
for details on the Interface Setup mode.
for details on removing the connector cover.
Chapter 3 Advanced Usage
81
3