Table of Contents
Advertisement
Resetting the Interface Settings
Follow the steps below to restore the network settings to the factory default.
1
Turn off the printer and close the roll paper cover.
2
If the bottom cover is attached, remove the cover.
See
"Removing the Printer Covers" on page 103
3
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
The interface settings can also be initialized from the Interface Setup Mode. See
Mode" on page 83
for more details.
for details on removing the bottom cover.
Chapter 3 Advanced Usage
"Interface Setup
90
Hide quick links:
Advertisement
Table of Contents
