Table of Contents
Advertisement
Resetting the Interface Settings
Follow the steps below to reset the interface settings.
1
Turn off the printer and close the roll paper cover.
2
Hold down the status sheet button while turning on the printer.
A message is printed indicating that resetting is being performed, and the printer restarts.
• You can return the interface settings to their defaults from the Interface Setup mode. For details
on the Interface Setup mode, see
• Only network settings are returned to their defaults.
Hold down the status sheet button until the initialization execution message is printed.
"Interface Setup Mode (Ethernet model only)" on page
Chapter 3 Advanced Usage
40.
43
Advertisement
Table of Contents
