Table of Contents
Advertisement
[AUTO]
[12-bit]
[10-bit]
Setting [3G-SDI MAPPING]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [3G-SDI MAPPING].
4)
Press qw to switch the item.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f This item does not operate during SD-SDI or HD-SDI signal input.
[ON-SCREEN DISPLAY]
Set the on-screen display.
Setting [OSD POSITION]
Set the position of the menu screen (OSD).
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD POSITION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[1]
Setting [OSD ROTATION]
Set the orientation of the menu screen (OSD).
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD ROTATION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
110 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Automatically selects [LEVEL A] or [LEVEL B].
Fixes to [LEVEL A].
Fixes to [LEVEL B].
Sets to the center left of the screen.
Sets to the bottom left of the screen.
Sets to the top center of the screen.
Sets to the center of the screen.
Sets to the bottom center of the screen.
Sets to the upper right of the screen.
Sets to the center right of the screen.
Sets to the bottom right of the screen.
Sets to the upper left of the screen.
Advertisement
Table of Contents
