Setting The Lens Position - Panasonic PT-RZ870LBEJ Operating Instructions Manual

Setting the lens position

To move the lens position to the home position or the lens standard position, perform the following procedure.
1) Press the <DEFAULT> button on the remote control while the shift adjustment screen is displayed.
f The [HOME POSITION] screen is displayed.
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[DLE030]
3) Press the <ENTER> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the lens position returns to the home
position or the lens standard position.
Note
f Complete the operation within approximately 5 seconds after the [HOME POSITION] screen is displayed. The [HOME POSITION] screen
will disappear after time limit.
f The home position is an origin position of the lens shift (vertical position and horizontal position of the lens) based on the calibration result. It
does not match with the optical image center position.
The calibration can be executed with the [PROJECTOR SETUP] menu → [LENS CALIBRATION].
f You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for at least three seconds.
70 - ENGLISH
Chapter 3 Basic Operations — Projecting
LENS
HOME POSITION
CHANGE
EXECUTE
ENTER
Moves the lens to the home position.
Select this item when replacing or removing the projection lens. Select this item when the Fixed-focus
Lens (Model No.: ET-DLE055) is used for projection.
Moves the lens to the ET-DLE030, ET-DLE035 lens standard position.
Select this item when the Fixed-focus Lens (Model No.: ET-DLE030, ET-DLE035) is used for
projection.
NORMAL
CANCEL
MENU