Table of Contents
Advertisement
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [WARNING MESSAGE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f If [OFF] is set, the warning message will not be displayed on the projected image even when warning condition such as [TEMPERATURE
WARNING] is detected while using the projector. Also, the following countdown message is not displayed: the message until the power
is turned off after the no signal lights-out function is executed; the message until the light source is turned off after the no signal lights-out
function is executed
[CLOSED CAPTION SETTING] (only when NTSC or 480/60i YC
Set closed captions.
Selecting the closed caption display
1)
Press as to select [CLOSED CAPTION SETTING].
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3)
Press as to select [CLOSED CAPTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 5) when [ON] is selected.
5)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Setting the closed caption mode
1)
Press as to select [CLOSED CAPTION SETTING].
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3)
Press as to select [MODE].
f [MODE] cannot be selected when [CLOSED CAPTION] is set to [OFF].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[CC1]
[CC2]
[CC3]
[CC4]
112 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the warning message.
Hides the warning message.
Hides closed captions.
Displays closed captions.
Displays CC1 data.
Displays CC2 data.
Displays CC3 data.
Displays CC4 data.
C
signal is input)
B
R
Advertisement
Table of Contents
