Set Up Print Jobs; What You Need To Know Before You Send Your Print Jobs - Oce ColorWave 600 User Manual

What you need to know before you send your print jobs

Set up print jobs

What you need to know before you send your print jobs
Definition
Before you send print jobs to the Océ ColorWave
The values defined in the Océ Express WebTools are default values for the
■
general system behavior. You can define a number of job settings in the Océ
printer drivers or the Océ job submission tools. The settings defined in the printer
drivers or the job submission tools always overrule the settings defined in the Océ
Express WebTools.
Make sure that you define the correct print setting mode for your job
■
setting' on page
Make sure that you define and load the correct media for your job.
■
the media related settings on page 186
Make sure that you define the correct job settings. For example, orientation,
■
rotation, and media type.
Note: When the requested media type is not available on the printer, the printer will
give a media request. Depending on the 'Media request time-out' settings in the Océ
Express WebTools
waits until the media is loaded or the print job will be send to the queue (hold to)
after the time-out has expired.
170 Chapter 5 Use the printing system
219.
(Configure the 'Media request time-out' on page
™
600, remember the following.
Set the 'Print
Overview of
104), the printer