Omron V680 Series User Manual page 87

 V680S-D2KF67/-D8KF67
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to RF Tag Installation Precautions in Section 11 Appendices for information on the effect of metal at the back surface,
Mutual Interference of RF Tags and Influence of Inclination of the V680S-D2KF67.
p.283
Refer to RF Tag Installation Precautions in Section 11 Appendices for information on the effect of metal at the back surface,
Mutual Interference of RF Tags and Influence of Inclination of the V680S-D8KF67.
p.283
You can use the V680S-D8KF67 with Reader/Writers with firmware version 2.00 or higher.
 V680S-D2KF67M/-D8KF67M
Mount the V680S-D8KF67M to a metal surface.
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to RF Tag Installation Precautions in Section 11 Appendices for information on the effect of surrounding metal, Mutual
Interference of RF Tags and Influence of Inclination on the V680S-D2KF67M.
p.283
Refer to RF Tag Installation Precautions in Section 11 Appendices for information on the effect of surrounding metal, Mutual
Interference of RF Tags and Influence of Inclination on the V680S-D8KF67M.
p.283
You can use the V680S-D8KF67M with Reader/Writers with firmware version 2.00 or higher.
Installation and Connections
Mounting Hole Dimensions
M3 screw
32
±0.2
Marked side
32
Mounting Hole Dimensions
M3 screw
32
±0.2
Marked side
32
Section 4
Two, M3 holes
±0.2
Two, M3 holes
±0.2
RFID System
85
User's Manual
(Modbus TCP)