Omron V680 Series User Manual page 157

4.
A confirmation message will be displayed. Click the OK Button.
5.
Click the Reboot Button. A Confirm Reboot Dialog Box will be displayed. Click the OK Button.
Click this button to reboot
the Reader Writer.
If you turn OFF the power supplies to the Slave Reader/Writers or if a communications error occurs for a Slave Reader/
Writer (e.g., Ethernet Cable disconnection) before you restart the Reader/Writers, an execution status error will occur
and the Reader/Writers will not restart normally. If that occurs, turn OFF the power supplies to all of the Reader/Writers
and then turn them back ON.
6.
The following dialog box is displayed after the Reader/Writer has finished rebooting.
Click the OK Button to connect to the Reader/Writer.
Click this button to cancel
rebooting the Reader Writer.
Section 6
Functions
RFID System
155
User's Manual
(Modbus TCP)