Omron V680 Series User Manual page 20

Section 1
Product Overview
 Simple Connection
The highly generic Ethernet is used to connect to the host device to enable easy connection with
Ethernet cable without any restrictions from the host PLC manufacturer. A Switching Hub can be used
to easily connect more than one RFID System.
Reader/Writer
Reader/Writer
Reader/Writer
Set the IP address to avoid conflicts.
RFID System
18
User's Manual
(Modbus TCP)
24-VDC
power supply
24-VDC
power supply
24-VDC
power supply
Switching Hub
Easy Addition of Reader/Writers Using an Ethernet Hub
* The DC Power Supply is needed to operate the devices.
PLC