Omron V680 Series User Manual page 81

 V680S-A64-S
Either use the V680S-A64-S Attachment to mount the Connector Cover with screws or permanently
attach the RF Tags with adhesive.
1.
Through a cord into a connector cover.
2.
Press a connector cover up until it clicks.
3.
Install the connector cover with two M4 screws.
Tightening torque: 1.2 N·m
When removing a connector, please remove the screw on which a connector cover is being fixed and shift a connector
cover.
(1),(2),(3) above-mentioned is reverse.
Installation and Connections
M4 screw
Spring washer
Flat washer
RFID System
Section 4
79
User's Manual
(Modbus TCP)