Omron V680 Series User Manual page 171

Error code name
RF Tag data lost error
RF Tag system error
RF Tag overwriting error
Reader/Writer connection error
Communications connection
error between Reader/Writers
 Reader/Writer Operation Errors
Error code name
Unfixed operation mode error
User setting error
Multi-Reader/Writer execution
error
 System Errors
Error code name
System startup errors
System memory error
Profile error
Hardware fault
IC error
Configuration memory
error
Error code
2007 hex Processing to write data to the RF Tag did not end normally.
(Data may have been lost and must be restored.)
2008 hex The RF Tag returned an error response.
2009 hex The overwrite limit was exceeded for overwrite count control processing.
200A hex When copying data, communications could not be established with the
copy destination Reader/Writer.
200B hex When executing Multi-Reader/Writer functions, communications could
not be established with a Slave Reader/Writer.
Error code
8001 hex The control signal was not stable when the Reader/Writer was started. A
record is recorded only in the system error log.
8002 hex An error was detected in user configuration memory when the Reader/
Writer was started. A record is recorded only in the system error log.
The Attached information1, representing the erroneous classification
settings.
00000001 hex: Network settings
00000002 hex: RF Tag communication settings
8003 hex A set value was detected at startup that prevents execution of the Multi-
Reader/Writer Mode.
The reason for the error is given in attached information 1.
00000001 hex: The combination of the Multi-Reader/Writer Mode and
00000002 hex: A Slave Reader/Writer has the same IP address as the
Error code
F001 hex An error was detected in system memory. A record is recorded only in
the system error log.
F002 hex An error was detected in the profile data. A record is recorded only in the
system error log.
F011 hex An error was detected in an IC in the Reader/Writer.
F012 hex An error was detected when accessing configuration memory.
Host Communications Specifications
Description
Description
the communications option prevented execution.
Master Reader/Writer.
Description
Section 7
RFID System
169
User's Manual
(Modbus TCP)