Omron V680 Series User Manual page 170

Section 7
Host Communications Specifications
 Error Codes
If an exception code other than 00 hex (normal operation) is returned in the response from the Reader/
Writer, you can use a GET COMMUNICATIONS ERROR LOG query to get details on the nature of the
error.
The following tables list the error codes that indicate the response results from the Reader/Writer. If an
error response is returned (i.e., an error code other than 0000 hex), a record is recorded in the
communications error log in the Reader/Writer. Records are not recorded for errors for which
responses are not returned to the host device. Reader/Writer operating errors and system errors are
recorded in the system error log in the Reader/Writer.
 Normal Code
Error code name
Normal end
 Interrupted Processing
Error code name
Communications canceled
Communications aborted
 Query Errors
Error code name
Frame length error
Frame header error
Illegal query error
Query format error
Query parameter error
Execution status error
Query response error
*1. If a query response error occurs, the response from the Reader/Writer may not be received by the host device.Reconnect
to the Reader/Writer and check the cause of the error with a GET COMMUNICATIONS ERROR LOG query.
 RF Tag Communications Errors
Error code name
RF Tag missing error
RF Tag communications error
Tag ID mismatch error
RF Tag address error
RF Tag lock error
RF Tag verification error
RFID System
168
User's Manual
(Modbus TCP)
Error code
0000 hex Processing ended normally.
Error code
0001 hex Processing was canceled when a STOP query was received before an
RF Tag was detected.
(The contents of the RF Tag was not changed, even for a WRITE DATA
query.)
0002 hex Processing was aborted when a STOP query was received during
communications with an RF Tag.
(For a WRITE DATA query, the contents of the RF Tag may have been
changed.)
Error code
1001 hex A frame with a length that exceeded the protocol specification was
received.
1002 hex The frame header did not agree with the protocol specifications.
1003 hex A query that is not supported by the Reader/Writer was received.
1004 hex There was an error in the format of the received query data.
1005 hex There was an error in the parameters in the received query data.
1006 hex The Reader/Writer could not execute the query that was received.
*1
1010 hex A response could not be returned for a query that was received by the
Reader/Writer.(An example would be a TCP/IP socket communications
send failure.)
Error code
2001 hex There is no RF Tag in the communications field.
2002 hex Communications with the RF Tag did not end normally.
2003 hex An RF Tag with the specified ID was not in the communications field.
2004 hex The access address for the RF Tag is outside of the area supported by
the target RF Tag.
2005 hex An attempt was made to write data to a locked area.
2006 hex Processing to write data to the RF Tag did not end normally.
Description
Description
Description
Description