Furuno CSH8LMK2 Installation Manual page 38

2. WIRING
Display unit
Prepare a XGA display locally. When using MU-150HD as the display unit, refer to its
operator's manual. Connect the processor unit and display with the monitor cable
3COX-2P-6C 5 m or 10 m (supplied). Use the MONITOR 1 port for a display unit.
NMEA/CIF
NMEA input sentence
Talker
*1
*1
**
LC
**
**
**
*2
VD
LC
*3
**
**
**
**
VD
VD
*1: GPS navaid, Loran-C, II (other talker), TR
*2: GPS navaid, Loran-C, II (other talker), TR, VD
*3: GPS navaid, II (other talker), TR
**: Not specified
NMEA output sentence
Talker
SS
CIF input sentence
Data No.
21
24
28
54
4:
41
44
48
57
58
66
2-12
Sentence
GAA GPS position data
GLL Own ship position
GTD Own ship position (TD, LOP)
GLC TD (Loran-C)
HDG Heading (compass)
HDM Heading (magnetic bearing)
HDT Heading (true)
VTG Course over ground speed
VHW Water speed, heading
RMA Recommended minimum specific Loran-C data
RMC Recommended minimum specific GPS data
DBT Depth below transducer, Ver. 1.5
DBS Depth below sea level
DPT Depth below transducer plus offset value, Ver. 2.0
MTW Water temperature
VDR Water current, single layer
CUR Water current, multi-layers
Sentence
TTL
DR position
Loran-C position
GPS position
Loran-C, TD
Heading (true)
DR ship's speed and course
Loran-C ship's speed and course
GPS ship's speed and course
Depth of sea bottom
Water temperature
Current indicator ship's speed and course
Information
Information
Target position (L/L)
Information