Table of Contents
Advertisement
2. WIRING
How to use pin extractor
If a contact pin is inserted into an incorrect hole on the connector body, remove it with
the pin extractor.
1. Push the pin extractor into the pin hole from the side opposite to the pin inserting
side.
2. Push in the head of the pin extractor. The retaking spring comes free and the con-
tact pin can be removed.
Fixing the cable
Set shield and armor section in cable clamp and tighten cable clamp.
Other connections
Remote
controller
2-10
How to extract contact pin
Cable clamp
Shield and armor
How to set cable in cable clamp
NMEA1
CIF1
E/S
NMEA2
CIF2
Speaker
Monitor 2
Monitor 1
Control unit
Anticorrosive sheath
Gyro
(AD converter)
Speed log/current indicator
External KP
Transceiver unit
Ground
Advertisement
Table of Contents
