Ricoh Aficio SP C440DN Field Service Manual page 46

2. Installation
Item
Meter Click
Charge
Meter Click
Charge:
PCDU
Meter Click
Charge:
Image
Transfer Belt
Unit
Meter Click
Charge:
Fusing Unit
Counter
method
44
SP No.
SP5-930-001 Enables or disables Meter Click Charge.
When enabled:
• The counter menu shows
• You can print the counter from the
When disabled:
• The counter menu does not show.
SP5-930-010 Enables or disables the PM alert for the
PCDUs.
If this SP is enabled, an alert message is
displayed when the PCDUs need to be
replaced.
SP5-930-014 Enables or disables the PM alert for the
image transfer belt unit.
If this SP is enabled, an alert message is
displayed when the image transfer belt
unit needs to be replaced.
SP5-930-016 Enables or disables the PM alert for the
fusing unit.
If this SP is enabled, an alert message is
displayed when the fusing unit needs to
be replaced.
SP5-045-001 Specifies if the counting method used in
meter charge mode is based on
developments or prints.
Function
immediately after you push the
"Menu" key. The "Counter Method"
(SP5-045) sets the type of the
counter.
counter menu.
Default
"0": OFF
"1": No alert
"1": No alert
"1": No alert
"1": Prints