Ricoh Aficio SP C440DN Field Service Manual page 434

5. System Maintenance Reference
5-417-004 Attack Max Num
5420 [User Authentication]
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been
enabled.
5-420-041 Printer
5-420-051 SDK1
5-420-061 SDK2
5-420-071 SDK3
5481 [Authentication Error Code]
These SP codes determine how the authentication failures are displayed.
5-481-001 System Log Disp
5501 [PM Alarm Interval]
5-501-001 Printout
432
*CTL Sets a limit on the number of requests
received for certification in order to slow
down the certification speed when an
excessive number of access attempts have
been detected.
[50 to 200 / 200 /1 attempt /step]
*CTL Determines whether certification is required
before a user can use the printer
applications.
[0 to 1 / 0 / 1 /step]
0: On, 1: Off
*CTL [0 or 1 / 0 / 1 /step] 0: ON. 1: OFF
Determines whether certification is required
before a user can use the SDK application.
*CTL Determines whether an error code appears
in the system log after a user authentication
failure occurs.
[0 to 1 / 0 / 1 /step]
0: Off, 1: On
*CTL [0 to 9999 / 0 / 1 / step]
0: Alarm off
1 to 9999: Alarm goes off when Value (1 to
9999) x 1000 ≥ PM counter