Connecting A Computer - Toshiba TLP-MT7E Owner's Manual

Connecting a computer

You can project the picture from the computer.
Check that the power for the projector and computer is off before connecting the cables.
CONTROL
AUDIO IN jack
Notes
• The projector cannot be connected to a computer without an analog RGB connector. For details, refer to the computer manual.
• You may not be able to connect some computers to the projector. For details, consult the dealer.
• Some computers may have output modes which are not compatible with this projector. Check the compatibility of the connectors, signal levels, timing,
resolutions, etc.
COMPONENT IN
( COMPUTER )
VIDEO IN
AUDIO
IN R - AUDIO - L VIDEO S-VIDEO
To COMPONENT IN Connector
Be sure to connect in the proper direction.
Audio cable (Not supplied)
COMPONENT IN Connector
For use as both Y/P /P input and computer input. At shipping from
B R
factory, it is set for use as Y/P
menu screen when using as computer input.
AUDIO IN jack
For use as both audio signals for Y/P
To monitor port
Monitor cable
(Not supplied)
/P input. Change the setting on the
B R
41
/P input and computer input.
B R
Computer
ø 3.5mm Stereo mini-jack
To audio output port
23
CONTENTS