Toshiba TLP-MT7E Owner's Manual page 60

60
FULL MENU settings – Default setting (continued)
Remote control
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
MENU
VOL/ADJ
4-c
5
ENTER EXIT
CT-90072
When selecting "No signal power off" or "Power on" in step 3.
4-c
Control panel
(Main unit side)
AUTO AUTO
KEYSTONE SET
VOL/ADJ.
4-c
ENTER EXIT
5
MENU INPUT
ON/STANDBY
TEMP LAMP ON
BUSY FAN • If the power is turned off by pressing the ON/STANDBY button, the settings made are
• The settings of "Default setting" are applied to all the input sources. (It is impossible to store
Press VOL/ADJ (+/-) to set.
No signal power off
OFF: The power does not turn off automatically even if the no
signal status continues.
5 min.: The power turns off automatically if the no signal status
continues for approx. 5 min.
Power on
Manual: The power turns on by pressing the ON/STANDBY button.
Auto: When the power cord is plugged, the power turns on.
(However, press the ON/STANDBY button when turns
power off. )
5
After the settings are finished, press EXIT.
EXIT
The menu screen disappears.
EXIT
Notes
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs
while the projector is on, the settings are not stored in the memory.
different settings for each input source.)