Connecting A Computer - Toshiba TDP-S1-US User Manual

Connecting a Computer

1 Plug the end of the CableWizard Lite cable into the video
connector on your computer.
2 Plug the end of the CableWizard Lite cable into the
connector on the projector's connector panel
Do you want to play your computer's audio on the projector?
1 Plug either end of the audio cable into the audio connector on
your computer.
2 Plug the other end of the audio cable into the
on the projector.
Now you're ready to power up the projector and your computer.
Skip to "Powering up the Projector and Adjusting the Image" on
page 10.
audio cable
CableWizard Lite cable
Connecting the CableWizard Lite to a computer
NOTE: Many portable computers
do not automatically turn on their
external video port when a sec-
ondary display device such as a
projector is connected. Refer to
your computer manual for the
command that activates the exter-
nal video port. Activation com-
mands for some portable
computers are listed in the Appen-
dix.
F 6
IGURE
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
connector
you must use the Mac adaptor
between the computer and the
CableWizard Lite.
NOTE: If you are connecting a
desktop computer and want to
view your presentation on your
monitor, purchase the optional
CableWizard.
7