Toshiba TLP-MT7E Owner's Manual page 22

22
Connecting video equipment (continued)
You can project the picture from video equipment by using VIDEO IN connectors.
Check that the power for the projector and video equipment is off before connecting the cables.
CONTROL
Note
The S-VIDEO connector and VIDEO jack can be used independently, but the audio input jacks are used as both the S-VIDEO and VIDEO input.
COMPONENT IN
( COMPUTER )
VIDEO IN
AUDIO
IN R - AUDIO - L VIDEO S-VIDEO
To S-VIDEO connector
(Red) To AUDIO-R jack
(White) To AUDIO-L jack
(Yellow) To VIDEO jack
S-VIDEO connector
At shipping from factory, the projector is set so that this
connector cannot be selected by the INPUT button.
Change the setting on the menu screen when using.
Be sure to connect in the
proper direction.
To S-video output
S-video cable
(Not supplied)
AV cable (Supplied)
41
Video equipment
Pin plug (red)
To audio output (R)
Pin plug (white)
To audio output (L)
Pin plug (yellow)
To video output