Toshiba TLP-MT7E Owner's Manual page 51

FULL MENU settings – Audio (continued)
Control panel
Remote control (Main unit side)
AUTO
KEYSTONE
VOL/ADJ.
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
ENTER
MENU
VOL/ADJ 4
MENU
ON/STANDBY
5
ENTER
EXIT
CT-90072
TEMP LAMP
BUSY
4
AUTO
SET
4
5
EXIT
5
INPUT
Notes
ON
• If the power is turned off by pressing the ON/STANDBY button, the settings made are
FAN
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs
while the projector is on, the settings are not stored in the memory.
• The "Audio" settings are applied to all the input sources. (It is impossible to change the
settings for each input source.)
Press VOL/ADJ (+/-) to adjust and set.
Speaker output
When set to "Off", no sound is produced from the speakers.
Channel select
L+R: The sound of the left and right channels is mixed and
developed from the speakers.
L: To develop only left input audio signal from the speakers.
R: To develop only right input audio signal from the speakers.
Loudness
When set to "On", the loudness effect is added to the speaker
sound.
After the settings are finished, press EXIT.
EXIT
The menu screen disappears.
EXIT
51