Toshiba TLP-MT7E Owner's Manual page 17

Floor-mounted projector placement (continued)
1 Place the projector on a steady, level surface such as a table.
To obtain proper screen projected, place the projector so that the projecting light hits the screen squarely.
Screen
90
Point the lens straight at the center of the screen as above.
2 Determine the screen size projected on the screen.
The projection size depends on the distance between the lens and the screen.
Adjust the projection size by changing the distances as shown below.
Screen
b
90
a
Top view
Projection size - 0.8660
a (min.) =
Projection size - 0.6766
a (max.) =
b = Projection size - (cm) x 0.143
a: Distance between the lens and
the screen (m)
b: Distance between the lens height
and the bottom of projection area
(cm)
Screen
90
Place the projector horizontally so that the projecting
light hits the screen squarely.
• The values are approximations.
Projection size
(inches)
25.339
19.796
Side view
a(m)
Minimum Maximum
(At maximum zoom) (At minimum zoom)
28 - 1.38
32 1.23 1.58
36 1.39 1.78
42 1.62 2.09
60 2.33 3.00
80 3.12 4.01
100 3.91 5.02
150 5.89 7.54
200 7.86 10.07
250 9.83 -
Continued
17
CONTENTS
b(cm)
10
12
13
15
22
29
36
55
73
91