Toshiba TLP-MT7E Owner's Manual page 53

FULL MENU settings – Keystone (continued)
Control panel
Remote control (Main unit side)
AUTO
KEYSTONE
VOL/ADJ.
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
ENTER
MENU
4-a
VOL/ADJ
MENU
4-b
ON/STANDBY
5
ENTER
EXIT
CT-90072
TEMP LAMP
BUSY
When selecting "Keystone" in step 3.
4-a
When selecting "Horizontal reference value reset" in step 3.
4-b
AUTO
SET
4-a
4-b
EXIT
5
INPUT
ON
FAN
5
Notes
• If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings made are
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the
projector is on, the adjustments or settings are not stored in the memory.
• The "Keystone" adjustments and settings are applied to all the input sources. (It is impossible to store
different adjustments and settings for each input source.)
Press VOL/ADJ (+/-) to adjust and set.
Keystone: To reduce the lower width
Press ENTER.
ENTER
The sub-menu of "Horizontal reference value reset" appears.
Y/P
Keystone
ENTER
Horizontal referrence value reset
Recalibrate the horizontal reference value
for keystone.
Are you sure ?
Yes
No
MENU ENTER
QUICK Select Enter
Use the selection buttons ( / ) to select
ENTER
"Yes" and press ENTER.
The horizontal reference value is reseted.
ENTER
EXIT
After the adjustments and settings are finished,
press EXIT several times until the menu screen
disappears.
Press the EXIT button once when the FULL MENU is
EXIT
displayed, press twice when the sub menu is displayed.
(-) (+)
To reduce the upper width
/P
B R
EXIT
Back
53