Projector Placement Angle Adjustment - Toshiba TLP-MT7E Owner's Manual

Projector placement angle adjustment

The tilt of the projector can be adjusted using the foot adjuster.
1
Foot adjuster
release button
2
Lift up
Lower
Notes
• To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.
• Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.
• Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the duration life of the lamp may be shortened.
Lift the front of the projector until a tilt angle desired is
obtained and hold down the foot adjuster release button.
The foot adjuster will stretch.
Release the button to lock in position.
Foot adjuster
Turn the foot adjuster to make fine adjustment of the
height.
Turn clockwise to lift up.
Turn counterclockwise to lower.
Lift up Lower
19
CONTENTS