Toshiba TLP-MT7E Owner's Manual page 66

66
Air filter cleaning (continued)
Notes
• When the air filter is dusty, the ventilation is
impaired. This causes the temperature inside the
projector to rise, and may damage the unit.
• Attach the air filter cover firmly after the cleaning. If
it is not set correctly, the dusts will enter and they
will be projected and overlapped on the picture.
• If you wash the air filter with water, be sure to let it
dry fully before reinstalling it. Using it damp will
result in malfunction.
• If the air filter is damaged, contact your store of
purchase and replace it with a new one. Using a
damaged air filter will cause dust or dirt to get
inside the projector and onto the images.
5
Air filter
Air filter cover
6
Assemble the air filter.
Place the air filter in the air filter
cover, then insert the four tabs on
the filter frame into the holes in
the air filter cover.
Filter frame
Mount the air filter cover.
Insert the top of the air filter cover into the
projector first, then press on the bottom side to
install it.