Pip Menu Setting - Toshiba TLP-MT7E Owner's Manual

PIP menu setting

You can make the PIP sub-picture settings
and the sound settings when a PIP sub-
picture is displayed.
Control panel
Remote control
(Main unit side)
AUTO
KEYSTONE
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
ENTER
1
MENU
VOL/ADJ
MENU
2
3
ENTER EXIT
CT-90072
TEMP LAMP
BUSY
Preparation
Display the PIP sub-picture on the screen as explained in the step "Displaying PIP Sub-pictures".
1
1
AUTO
SET
2
VOL/ADJ.
2
EXIT
3
INPUT
1
ON/STANDBY
ON
FAN
3
Notes
• When the PIP sub-picture is turned off, the audio input source returns to the previous source (main
picture).
• If the power is turned off by pressing the ON/STANDBY button, the settings made are
automatically stored in the memory. If the power cord is unplugged or if a power failure occurs
while the projector is on, the settings are not stored in the memory.
Press MENU.
MENU
When a PIP sub-picture is displayed, the PIP menu screen appears.
PIP
MENU
Source Video S-Video
Size Small Large
Position
Audio Main Sub
Item Set
Use the selection buttons ( / ) to select the
setting items, then press VOL/ADJ (+/-) to set.
Source: Set the PIP sub-picture input source.
"Video input" or "S-video input" can be selected.
Size: Set the PIP sub-picture size.
"Small" or "Large"
Position: Set the display position of the PIP sub-picture.
"Upper left", "Upper right", "Lower left" or "Lower right"
Audio: Set the audio input source.
The sound of the selected picture ("Main picture" or "Sub-picture") is
output from the speakers and the AUDIO OUT jack.
EXIT
After the settings are finished, press EXIT.
The menu screen disappears.
EXIT
EXIT
Quit
63
34