Toshiba TLP-MT7E Owner's Manual page 27

Projection on the screen (continued)
Control panel
(Main unit side)
Remote control
AUTO
KEYSTONE
VOL/ADJ.
ON /
STANDBY
INPUT
KEYSTONE AUTO SET
FREEZE MUTE
PIP CALL RESIZE
ENTER
MENU
VOL/ADJ
6
MENU
ON/STANDBY
ENTER EXIT
CT-90072
TEMP LAMP
BUSY
4
5
4
AUTO
SET
6
5
EXIT
INPUT
6
ON
FAN
Notes
• When changing the projecting angle, adjust the foot adjuster.
• When the screen image is distorted in keystone, press the AUTO KEYSTONE button.
• The projector may stop operating if the surrounding temperature is too high or if the air filter is
clogged with dust.
• Due to the lamp characteristic, flickers may occasionally occur in a picture. This is not
malfunction of the unit.
• The projector's liquid crystal panel is made using extremely advanced technology, but there
may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on
the panel. Please note that these are not malfunctions.
• When trying to press the button whose operation is not available, the icon
• When supplying the signal not compatible to the projector, the icon
• When signals are not input from the input source, the icon
Adjust the picture size by turning the
zooming lever.
Turn to the right to enlarge the picture.
Turn to the left to reduce the picture.
Focus on the picture by turning the
focusing ring.
A still picture is recommended for focusing.
Press VOL/ADJ (+/-) to adjust volume.
Press the (+) button to increase volume.
Press the (-) button to decrease volume.
The volume adjusting bar and the icon appear.
16
64
19
29
appears.
appears.
appears.
27