Table of Contents
Advertisement
LAN
Select [LAN] from the Main Menu (see "How to
operate menu" on page 33) and then select the
item from the Sub Menu.
Note
The following settings are set before the projector leaves
z
the factory.
DHCP
IP Address
Subnet Mask
Gateway
DNS
If you want to use a DHCP server, please make sure that
z
the DHCP server is enabled.
For more information about the IP Address, Subnet
z
Mask, Gateway, and DNS, please contact your network
administrator.
DHCP
Set whether to use DHCP server.
1 )
Press ▲▼ to select [DHCP].
2 )
Press ► to display the setting dialog
box.
3 )
Press ▲▼ to switch [On]/[Off].
Press <MENU> button to exit the switching and
z
go back to the previous menu.
4 )
Press ► to confirm.
After selecting [On], the message about LAN
z
restarting will be displayed. The setting of
DHCP finishes when the message disappears.
5 )
Press <MENU> to exit.
Off
192.168.10.100
255.255.255.0
192.168.10.1
0.0.0.0
The projector will acquire the IP
On
address automatically.
User must set the [IP Address],
Off
[Subnet Mask], [Gateway] and
[DNS] manually.
IP Address
Select an IP Address of projector connected to
network.
1 )
Press ▲▼ to select [IP Address].
2 )
Press ► to display the setting dialog
box.
3 )
Press ▲▼◄► to input digit numbers.
4 )
Press <MENU> to exit.
Subnet Mask
Select Subnet Mask of projector for network
connection.
1 )
Press ▲▼ to select [Subnet Mask].
2 )
Press ► to display the setting dialog
box.
3 )
Press ▲▼◄► to input digit numbers.
4 )
Press <MENU> to exit.
Gateway
Select Gateway of projector for network connection.
1 )
Press ▲▼ to select [Gateway].
2 )
Press ► to display the setting dialog box.
3 )
Press ▲▼◄► to input digit numbers.
4 )
Press <MENU> to exit.
DNS
Select DNS of projector for network connection.
1 )
Press ▲▼ to select [DNS].
2 )
Press ► to display the setting dialog
box.
3 )
Press ▲▼◄► to input digit numbers.
4 )
Press <MENU> to exit.
LAN
45
ENGLISH -
Advertisement
Table of Contents
