Thumbscrew Rack Ear Assembly - HP ProLiant DL60 Gen9 Maintenance And Service Manual

Disconnect the cables for the front I/O module and then remove the front I/O module from the system
6.
board.
To replace the component, reverse the removal procedure.

Thumbscrew rack ear assembly

WARNING:
internal system components to cool before touching them.
CAUTION:
precautions before beginning any installation, removal, or replacement procedure. Improper
grounding can cause electrostatic discharge.
To remove the component:
Power down the server (on page 26).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 27).
3.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, take the appropriate anti-static
Removal and replacement procedures 60