HP ProLiant DL60 Gen9 Maintenance And Service Manual page 48

Remove the server from the rack (on page 27).
o
Remove the access panel
4.
Remove the air baffle (on page 28).
5.
Remove the heatsink:
6.
Loosen one pair of diagonally opposite screws halfway, and then loosen the other pair of screws.
a.
Completely loosen all screws in the same sequence.
b.
Remove the heatsink from the processor backplate.
c.
CAUTION: The pins on the processor socket are very fragile. Any damage to them may require
replacing the system board.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
7.
bracket.
("Access panel" on page 33).
Removal and replacement procedures 48