Enabling The Boot Watchdog; Verifying The System Time Settings - Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual

Basic software procedures
▶ Save your changes and exit the firmware.
The option ROM of the expansion card can now be disabled in the
BIOS.
Exception: If the expansion card controls a permanent boot device, the
Option ROM of the expansion card has to remain enabled.
5.2.3

Enabling the boot watchdog

If the boot watchdog has been disabled for firmware upgrade purposes (see
"Disabling the boot watchdog" on page
the maintenance task.
Timer settings can be configured in the BIOS.
Enabling the boot watchdog in the BIOS
▶ Enter the BIOS.
▶ Select the Server Mgmt menu.
▶ Under Boot Watchdog set the Action setting to Reset.
▶ Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
5.2.4

Verifying the system time settings

This task only applies to Linux environments.
After the system board has been replaced, the system time is set automatically.
By default, the RTC (Real Time Clock) time standard is set as the local time.
72
67), it has to be re-enabled to complete
Upgrade and Maintenance Manual GX2570 M6