Table of Contents
Advertisement
▶ Push the four latches inward.
▶ Carefully place the LC heat sink onto the CPU socket.
▶ Push the four latches outward.
Figure 152: Installing the LC heat sink (B)
▶ Fasten the four captive screws in the sequence printed on the LC heat sink
(1 to 4).
Tool: Torx T30 screw driver
Torque: 0.9 - 1.0 Nm
▶ Proceed for the second LC heat sink in the same way.
▶ Remove the orange protective caps from the tube connectors.
GX2570 M6
Upgrade and Maintenance Manual
Liquid cooling (LC)
203
Advertisement
Table of Contents
