Table of Contents
Advertisement
Expansion cards and riser modules
▶ Fasten the two screws on the chassis outside (see circles).
Figure 89: Fastening the screws
▶ Fasten the four screws (see circles).
▶ Connect all cables to the HDD backplane.
For the cable plan, see
"Appendix B" on page
275.
Concluding steps
▶
"Installing the new OCP module" on page
152.
▶ Install all expansion cards, see
"Installing an expansion card" on page
130.
140
Upgrade and Maintenance Manual
GX2570 M6
Advertisement
Table of Contents
